New front door vs. the lease

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #7026
    gingerbbm
    Participant

      Hi folks. When I bought my flat in Fletcher Court it already had a replacement wooden front door. That is now worn out and I want to replace it with a uPVC door and new frame. I scanned the lease and it’s not clear to me whether it allows me to do this. Have you done this?

      Furthermore, a contractor I spoke to about doing the installation questioned whether Camden stipulated anything about fireproofness. There’s definitely nothing in my lease about this. I assume it’s more an internal door thing anyway, but curious about your knowledge/experience.

      I have emailed Leaseholder Services but thought I’d try here too!

      Thanks
      Stuart

      #7027
      Leaseholder1
      Participant

        I would expect your lease to refer to alterations to the property and stipulate whether you require freeholder consent to make them. I would expect changing the door to be an alteration.

        Depending upon the nature of your property, you may need planning permission (I think you can send an online enquiry using Camden’s planning portal).

        The door will also need to be compliant with applicable fire regulations, which will depend upon the nature of your property. Your builder should know what those regulations are.

        #7029
        skinkone
        Participant

          I live in a tower block and Camden Council was adamant that their and only their contractor be allowed to replace the front door. Supposedly this was to ensure adherence to fire safety. I initially wanted to change the door myself, compliant of course with regulations, but they would not allow it, even if I could somehow get a certificate. I live in a building where the Council had begun replacing older doors with new ones with better fire ratings, so after a few years of back-and-forth, they finally got around to mine. Apparently the delay was due to issues they were having with their own door suppliers/contractors. The good news was that I did not have to pay at all and the installation was done well. It did, however, take a lot of badgering and follow-up from my end.

          #7031
          CarolynM
          Participant

            I have a flat in a Victorian street property (two flats other is a council tenant). The flat door (not the communal street door) was horrible so five years ago when I moved in I asked about replacing it. I offered to pay to replace it with a private contractor but ran into the same issues about it has to meet fire regs, so nothing happened. Then Camden said they would replace it as part of a large scale programme. This took TWO YEARS to finally happen. I was chasing via email on a fortnightly basis, but as I work full time, not calling up. The door is quite nice and a big improvement but it has taken literally years to get here. Ask LS about the schedule for rolling out the new fire doors.

            #7033
            bourneestate
            Participant

              If you’re not in a conservation area or the building is not grade listed, then you should not require any permission to change your front door.

              #7034
              gingerbbm
              Participant

                Thank you to everyone who responded. In conclusion I will wait for a response from Camden.

                I really appreciate you taking the time to reply.

                Stuart

                #7032
                londongal
                Participant

                  Hi Skinkone, we only have one Silica (manufacturer) key left for our original council tower flat door. It’s on Regent’s Park Estate. They said we had to pay for a new door. We can’t get it cut. Reading that you got yours paid for by the council makes me hope that they were mistaken. Is your flat also a Regent’s Park Estate flat? I wish I could post photos on here but I don’t think I can.

                  #7143
                  Serena
                  Participant

                    I’ve recently received letters from the council about updating internal flat front doors to comply with fire door regulations. Having contacted them, they informed me as a leaseholder it’s my responsibility to replace the front door. This is different to what I’d been told by them previously, but I can’t see anything explicit in the lease either way and would rather arrange it myself to get a better quality door. Having said that I’m struggling to find a licensed fire door provider and installer who deals with individuals rather than trade. Has anyone else replaced their front door or have recommendations of companies that meet the required standards?
                    Thanks

                    #7146
                    gingerbbm
                    Participant

                      Hi, I’ve been meaning to update my thread with the information Camden sent to me. It blew my mind a little because it’s quite a process.

                      Initial reply from Camden:

                      Please note the new front entrance door and frame (doorset) must be a certified FD30S door set installed by a 3rd party certified fire door installer, the letter ‘S’ after the figure (e.g. FD30S) denotes a requirement for smoke seals to be fitted so as to restrict the passage of smoke.

                      The doorset must also comply with the Secure by Design Scheme. This means that the fabricator supplying the finished product to site is required to present independent third party dual certification from a single UKAS accredited certification body for both elements (fire and security). All door styles and components will need to be adequately described within the scope of certification and accompanying Technical Schedule. Any component part of the doorset that is changed for any reason must be assessed by the certification body to ensure compliance with both fire and security.

                      The new doorset must be fitted (if approved) by an installer who is part of a third party accreditation scheme i.e. BM Trada and the installer must provide installation certification for the new doorset. You must also obtain Building Control Approval for the new doorset and obtain a Building Control completion certificate for the doorset.

                      Copies of the certifications mentioned above must be submitted to Landlord services when the door is installed.

                      [The] Councils Asbestos Compliance Team […] will provide you with the asbestos information the Council holds for this property, they will also advise you on what you will need to do if there is no asbestos information available for this property…

                      Planning permission may be required for the new door…

                      Please do not proceed with the proposed work until you have received the written consent of the Landlord Services Team.

                      I then asked some questions. Here are the responses:

                      your front door opens onto an external walkway and residents have to walk pass the door, so that is the reason for a FD30S doorset.

                      Regarding building control their email is Building.Control@camden.gov.uk, information regarding the Building Control application process etc can be found at Apply for building control – Camden Council

                      As the work you are proposing is a non-layout change, please submit the certification to the Landlord Services Team, your Neighbourhood Housing Officer.

                      the Planning application process etc can be found at Planning and building development – Camden Council

                      The Council is unable to provide you with the details of an accredited third party installer, however a third party accredited organisation such as BM Trada will be able to assist you.

                      An asbestos refurbishment survey is required because asbestos linings may be present between the doorframe and the wall; it is advised that a UKAS accredited asbestos company conducts the asbestos survey.

                      —


                      @Serena
                      : I also received that communication about firedoors, which was a strange coincidence. I thought it was curious because it didn’t mention anything about any action that needed to be taken. I’m afraid, having received the above information on what it will take to change the front door, I have made zero progress because it’s just too big to tackle right now, so no recommendations for installers as yet.

                      Stuart

                      #7147
                      Serena
                      Participant

                        Hi Stuart, thanks for sending that on, it’s really helpful to be aware of, if a little frustrating! I’ll start looking into it and see how far I get.
                        Thanks,
                        Serena

                        #7148
                        bourneestate
                        Participant

                          That’s what the council wants you to do. Whether the lease or current regulations requires you to do all those things is another matter, especially if the existing doors do not have the feaures being demanded.

                          #7150
                          MJRenns
                          Participant

                            I thought leaseholders doors would be replaced as well, initially this was due to happen in the summer 2023, but it has now been put back to beginning of next year. Capital works (always prompt replies) have said the Bourne Estate doors would be installed alongside the remaining phases of windows. I had tried looking for a new door previously however to get the fire door FD30 was proving to be quite difficult..

                          Viewing 12 posts - 1 through 12 (of 12 total)
                          • You must be logged in to reply to this topic.